Get the latest answers and gain all the knowledge to inspire you.
I’m loading a new pair of servers I wondering if I should move the MongoDB to the a different drive then where the OS is running, I have 127 SDA and 250 SDB I think with the requirements in the for mongodb I would best install it on SDB drive or should I just delete the SDB and expand SDA?
Is there any way to apply more than one dataview within a single Qapp? I have created a Qapp that has two data tables, however even though you can create what looks like two dataviews, the definition of those only references Table 1 and I have not found a way to change the reference.
I have a runbook which has 2 Qapps and 1 Gapp, each of the Qapps generate Alerts based on the conditions and I can manually export the Alerts in csv format. Here, looking for a way to export the Alerts of Qapps/runbook using python or existing Netbrain APIs.
So when I run a show command on a device in my Domain within NetBrain it takes about 30 seconds to retrieve the live data from the device so some critical data about the device are not seen in the output or result. But when I ssh into the device itself and run the same show command, it takes about 120 seconds to complete, thus retrieves the total and accurate data needed. How do I extend the time for data retrieval through CLI on a specific device within my Domain in NetBrain, specifically taking into consideration the Front Server settings? Thanks!
Has anyone tackled this beast? I am trying to setup routing via Velocloud Edge devices. I am not able to use API or CLI due to the account’s setup. I am getting output but before I dug too deep into working on this, I didn’t know if there was something available. https://mibs.observium.org/mib/VELOCLOUD-EDGE-MIB/ .Mib: 18.104.22.168.4.1.45322.214.171.124.126.96.36.199.6 Has anyone here tried to create route maps via snmp?
Is there an option with adding a device with a pre-built configuration without having to be online for discovery? It will be used for path maps usage, but the customer didn’t want netbrain to have access to a few boxes on the network. We are talking about a few sites compared to the several thousand assets we have been able to discover. We didn’t want to have the situation where a gap in path calculations can occur.I am also thinking this could be useful for test environments to see how traffic will transverse the network. Thoughts?
Hello,can API node (blue cloud) retake or incept variable or column or column attributer from previous nodes?Not cleat what "Paramaters” are used for. No docs found.My use case is to process group of devices with REST API calls but I need to distinguish last device in que is being processed so final API call at the end with consolidated values can be triggered. Thanks
I have a path drawing from A-Z, how can I make it show active gre-tunnels as well on the same drawing only for Z device?I am also trying to recall how to add new node/ device on current path map and see connections from/to it? I have done that before but cannot recall it. Thanks
Hi,I’m using Netbrain 10.0a and the Rest API to get the One-IP table. API returns serverType and switchType by their ID but I want the full name. serverType string The type of the device that the IP belongs to. switchType string The type of the switch that the IP connects to. I found old Netbrain documentations on the net about IDs and their name. For example: 2004 = Cisco Nexus SwitchBut I can’t find the information for these IDs :1005100930080Can someone help me? Thank you.
We have a scenario where we are trying to search for a Cisco VoIP device using the standard search box on the dashboard. We have the switches added to Netbrain but the VoIP phones are not. The the sake of this example the devices hostname is SEP010203ABCDEF and it’s MAC address is 01:02:03:AB:CD:EF. The Hostname for a Cisco VoIP phone is usually SEP followed by the MAC address without any punctuation. The NDP table on the switch has the information to show that the device is a neighbour so in some capacity Netbrain could be aware of the name.. Searching for SEP010203ABCDEF reveals no results. Searching for 010203ABCDEF reveals no results Searching for 0102.03AB.CDEF returns a direct match in the ARP cache of the switch Searching for 01:02:03:AB:CD:EF returns a match for the MAC in the cisco format above in the ARP cache of the switch The ideal here is to search for the hostname in the easiest and quickest way possible. While modifying the name each time can be done to produce a correct
I want to reinstall the database server but when I am installation the Netbrain latest v10 it is showing me the following below error: A previous version has been installed. I already uninstalled the mongodb and other related services from the server but still getting this error. Don't want to upgrade database just want to do wipe all the netbrain configuration
I have maybe a strange request. To help support audit and compliance reporting, I want to create an inventory report for each of my maps that I can export from the product.I see that in the reporting interface I have a report that will export all devices, but how to do I create something on a site-by-site basis?Thanks in advance!
Hi all , I am reaching to out to forum for assistance on managing ICMP only enabled devices. I am working on architecture for laying out diagnostic approach for set of 60k devices. Out of 60 , i have 16K devices which are only ICMP enable by customer due to various security limitations and compliance. NO SNMP& SSH to these 16kK Device. During discovery will there 16K devices consume NB license as usual ? What all capabilities diagnostics approach will be present by ICMP only connection . Can these ICMP only devices contribute to effective diagnostic capability what Netbrain has to offer, Any suggestion /recommendation to manage this set of devices is welcome and appreciated by community. RegardPrateek
Anyone have an exhaustive list of 3rd party libraries w/versions used IE v10.0a?I have the following but unsure if its a full list or not. Associated Library Underscore.js v1.9.1 Redis v6.0.9 URI .js v1.18.1 Log4Net v188.8.131.52 Bootstrap v4.1.3 Minimist v0.0.8 Lodash OpenSSL v1.1.1j URI.js v1.18.1 Bleach v3.1.0 Tensorboard v2.0.2 Urllib3 PyYaml v5.2 & v5.3.1 Pandas v0.25.3 Pygments v2.5.2 Mongodb v4.0.19 Rabbitmq v3.8.9
Login to the community
No account yet? Create an account
Sign in with SSOLogin via NetBrain University
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Facebook | Instagram | Youtube | Twitter | LinkedIn
Privacy & Security Statement | Terms & Conditions | Impressum | UK Modern Slavery Statement