Skip to main content

Automation Hackathon

No code Network automation Hackathon

16 Topics
H
harishchandrasFrequent Participant
asked in Ask for Help
Failed to login, error code: 301; error description: Timeout.

During device discovery, we are getting error “Failed to login, error code: 301; error description: Timeout.”We can ssh and login to devices from front server.

422
M
T
tabordlNew Participant
asked in General Discussion
mongoexport device configuration files

How can I use mongoexport to download device configuration files?

527
T
J
jpmackzNew Participant
asked in General Discussion
Path Calculation API advanced options object

Hello,On NetBrain-REST-API-R11/REST APIs Documentation/Path Management/Calculate Path API.md at main · NetBrainAPI/NetBrain-REST-API-R11 · GitHub, there is a section on the Request body(*required) table indicating advanced options as an object. How do we instantiate this advanced object and use its methods?advanced object advance setting. advanced.debugMode bool The debug mode of trigger API. advanced.calcWhenDeniedByACL bool Whether to keep calculate when the process been denied by ACL. advanced.calcWhenDeniedByPolicy bool Whether to keep calculate when the process been denied by policy. advanced.calcL3ActivePath bool Whether to calculate L3 active path. advanced.useCommandsWithArguments bool Whether to use the commands with arguments inside. advanced.enablePathFixup bool Whether to enable the path fixup feature.  Also, how do we save on the front gui any path calculations we have created using the API? TIA

1201
V
P
PuterFellerNew Participant
asked in Ask for Help
Palo Alto interfaces not discovered

I’m working in an inherited Netbrain install. One pair of our Palo Alto NGFWs only show HA and management interfaces, none of the physical ethernet interfaces. This causes issues when searching paths that run through these firewalls. A path search that traverses this firewall will start with a switch directly connected to the firewall. If the next hop from the layer 3 switch is an ethernet interface/zone on the Palo Alto, Netbrain places an End System on the map. The end system’s IP address is the one assigned to the PA ethernet interface. The path ends with this “end system” (and a Path Failed message: Gateway device was not found), as there is no apparent discovered route from the source zone to the destination zone in the firewall, and then to the eventual destination. When viewing the firewall’s config in Netbrain, the physical interfaces are listed, along with the virtual router’s associated zones, corresponding interfaces and routes. +++In comparison, a different pair of Palo Alt

1821
G
L
LucyCRNew Participant
asked in Ask for Help
Netbrain data-server in disconnected state

Hi everyone,A couple of days ago suddenly in Service Monitor the data server is showing as offline and all services stopped. The thing is that actually the data service is on and responsive, and service monitor agent is running as well as all of the services.An even stranger thing is that when I restart the FS the data server appears as Connected with all the services running, but after a couple of seconds it goes back to Disconnected.Any ideas on this? Our Netbrin version is 10.1.15.10 in case is needed.

992
L
L
LucyCRNew Participant
asked in Ask for Help
Authentication error in Firewall

Hi again everyone.Is there a way to not to check SSH credentials in a Palo Alto Firewall in Netbrain? Our firewall rejects those kind of auth attempts (as many other FW do) so it appears as a validation error in the map and seeing it red is kind of nerve wracking. Thanks in advance

501
G
M
Manav AgarwallaNew Participant
asked in General Discussion
NetBrain Architecture

I need guidance in comprehending the data flow and how the various NetBrain components(Worker/TaskEngine/FSC/Redis/RabbitMQ/Elasticsearch/DB) are used when an end user initiates a task through the browser-based thin client.

1722
A
T
Troy MellonNew Participant
asked in Ask for Help
Trying to find if a certain value exists

On my Cisco 9400 switches, some have an SSD inserted and some don’t.  I am trying to find a way to report on those who do have an SSD.  The only way I know to check is to issue the show hardware command (the lines in green appear if the SSD is installed): ncmc-svsw-es03#show hardware...cisco C9407R (X86) processor (revision V01) with 1841385K/6147K bytes of memory.Processor board ID FOX2717PJK13 Virtual Ethernet interfaces144 Gigabit Ethernet interfaces16 Ten Gigabit Ethernet interfaces4 Forty Gigabit Ethernet interfaces32768K bytes of non-volatile configuration memory.15995688K bytes of physical memory.11161600K bytes of Bootflash at bootflash:.1638400K bytes of Crash Files at crashinfo:.234430023K bytes of SATA hard disk at disk0:.1638400K bytes of Crash Files at crashinfo-1-1:.11161600K bytes of Bootflash at bootflash-1-1:.234430023K bytes of SATA hard disk at disk0-1-1:.Base Ethernet MAC Address          : 58:56:9f:56:cb:40Motherboard Assembly Number        : 4A39Motherboard Serial

551
C
J
JackPrendergastNew Participant
asked in Ask for Help
Auto Intents into a Runbook

Hello, I am looking to put an auto-intent into a runbook. Reason being is that I can export the diagnosis output of intents into a word document. I dont think its natively possible to add an auto intent or auto intent profile into a runbook. Are there any work arounds? Any easy ways to add an auto intent/auto intent profile into a QAPP? Then add the QAPP into a runbook?The auto intents are crucial as the replication logic is something we will use all the time due to different environments, hostnames etc - hence discounting common intents without the auto-replication via auto intent. Thanks

481
pradeep.gaddameedi
J
jkbriggs78New Participant
asked in Ask for Help
What will I lose if I uninstall the entire IE and reinstall from scratch?

I had an oopsi and now cannot get my front server reconnected. In the 2 server deployment I accidently hit yes on the uninstall front server controller and then it no longer accepted the credentials but I do believe I was using the same credentials. One of the tests were successful for reconnecting to the front server but yet it would never reconnect. So I thought why not jump back another level and uninstall FS and FSC and start over, now I have even less than I previously had. Suggestions on how to not lose a ton of work but get this deployment healthy again?

431
A
A
akatwarooNew Participant
asked in Ask for Help
Parse Configuration File in Json format

I see an option option to parse json tables, however, I am not able to populate the “Data Scope”, which prevents me from moving forward. Is there a step that I’m missing?  Snippet of the config: Device:[    {        "_id": "abcdefg12345",        "address": "",        "dn": "abcdefg12345",        "isRealDev": true,        "isRealIntf": false,        "mac": "abcdefg12345",        "model": "device_model 1000",        "name": "abcdefg12345",        "networkName": "abcdefg12345",        "opTime": {            "$date": 1711950376000        },        "role": "primary",        "serial": "abcd-efg1-2345",        "tags": [            "recently-added"        ],        "wan1Ip": "100.100.100.100",        "wan2Ip": null

761
A
H
HaniNew Participant
asked in Ask for Help
Multiple client command in one parser

is it possible to add many cli command in one parser. version R11.1bex show version. show run | sec vtyI am trying to create a parser to run multiple show commands to check some security compliancy. see picture attached. thanks Hani,

722
H
D
Dug1609New Participant
asked in Ask for Help
How can one monitor SFP's w/ DOM for optical health threshold?

Hello. NetBrain R11.1I’d like to pull SFP DOM information to trigger warnings / alarms when threshold values are met. Digital Optical Monitoring (DOM) for monitoring SFP transceiver performance and temperature:Enable DOM on the device. Assumes DOM capable SFP’s are used Example:SW1(config)#transceiver type allSW1(config-xcvr-type)#monitoringSW1(config-xcvr-type)#endThen use the DOM specific commands to display details:SW1(config)#sh int gi 1/3 transceiver detail         Optical                  High Alarm  High Warn  Low Warn   Low Alarm         Transmit Power     Threshold   Threshold  Threshold  ThresholdPort     (dBm)                  (dBm)       (dBm)      (dBm)      (dBm)-------  -----------------  ----------  ---------  ---------  ---------Gi1/3      -27.7                  0.9            -1.0         -11.5       -13.5          Optical            High Alarm High Warn Low Warn Low Alarm         Receive Power    Threshold Threshold  Threshold  ThresholdPort     (dBm)              (

961
C
celina.chan
celina.chanCommunity Manager
posted in General Discussion
November Hackathon solution is now available.

November Hackathon solution is now available.  In order to provide folks with more time to try out the solutions in the Hackathon lab, the next Hackathon will be happening on March 4th, 2024.  Who wants to try out the November Hackathon Challenges?  You can do so by logging onto the NetBrain Hackathon Lab with your NetBrain Lab account.   Give it a try and be ready for the next Hackathon in March!  Don’t have a Hackathon NetBrain Lab account?  Make sure you have completed at least one Power User after August 2023.  Not Qualified yet? - Register for the Power User Training.  

420
celina.chan
celina.chan
celina.chanCommunity Manager
posted in Announcement
Hackathon Challenge November 2023 Posted

This Month’s Challenge in the 4 categories below Map & Design Automation: Build automation to help us decode and baseline our OSPF design.  Auto-Diagnosis Automation: A mission-critical application, represented by path (10.20.10.10→ 10.30.11.100), is reported slow from time to time. Please build automation to troubleshoot the issue.  Network Assessment Automation: Users have reported intermittent network issues in the data center, and you are tasked to build automation to assess L2 stability across the network.  Safe Change Automation: A network change as designed is proposed over the weekend to disable an unsafe connectivity between enterprise and production domain. You are tasked to build automation to 1) verify the proposed design goal 2) Check the impacts by change, 3) Automate mandatory check for all changes. How to Access Access to our Hackathon environment: https://hackathon.netbrain.com/  Your login information was sent through an email with subject: ‘You Are Now Registered

3801
celina.chan
celina.chan
celina.chanCommunity Manager
posted in Announcement
NetBrain No-code Automation Hackathon

NetBrain is excited to announce the No-Code Network Automation Hackathon!     On the first Monday of every other month (six times yearly), we will release a set of real-world network challenges across 4 common problem areas: Map & Design Auto-Diagnosis Network Assessment Safe Change Grow your automation skills by competing in the hackathons!  Win awards and get on our leaderboard!  Please see our Hackathon Details for additional information.   

610
celina.chan
Terms & ConditionsCookie settings
Community |  Ideas

Facebook |  Instagram |  Youtube |  Twitter |  LinkedIn
Privacy & Security Statement  |  Terms & Conditions |  Impressum  |  UK Modern Slavery Statement
Copyright © 2021 by NetBrain Technologies Inc. - All rights reserved.